You are here: Home » News » Quality Inspection » Standard of Spray piece inspection

Standard of Spray piece inspection

Views:3     Author:Peacemounts Electronics     Publish Time: 2016-04-26      Origin:Peacemounts TV Wall Mounts China Manufacturer

Spray piece inspection:
Spray piece inspection
Project Kinds of Disadvantages  Standard of Description Check methods/ instrument

Scratch A side cannot be permitted; B side: 0.1*5 mm,  without touch and two pieces cannot appear in the same flat; C side: 0.1*10 mm,  without touch and three pieces cannot appear in the same flat Eye- measurement / Ruler
accept without touch Eye- measurement
Indentation A side and B side do not be permitted; C side: area≤1 mm2 Eye- measurement/ Dot gauge
Fragment or Deformation No Permission Eye- measurement
Granule  A side: radius≤0.4mm; B side: radius≤0.6mm; C side: radius≤1.0mm; five pieces cannot appear in the same flat Eye-measurement/ Dot gauge
Color difference No Permission Eye-measurement/ Color disk
Senior postdoctor No impact on product assembly function can be permitted to accept Practical  configuration
Screw Hole No thread or incomplete thread No Permission Eye-measurement/ Thread Standard/ Ring Gauge
Loose screw/ Lock configuration interference No Permission Torsiometer/Screw
Size Not up to the standard of measurement According to acknowledged the sample and picture sheet Calliper/ Microcalliper
Practical  configuration Assembly Interference No Permission Assembly with material object
Remark:1. All products delivered from godown must enclose OQC Report. If not, it will be considered as defective product treatment.
                   2. If clients have special requires, we will carry out in accordance with their requires.

Peacemounts Electronics Co.,Ltd.

  +86-13511625321
  +86-0512-5012 5799


@ Copyright 2015  Peacemounts Electronics Co.,Ltd.
Designed by wonder-tech     Manage Entrance    Site Map